Please scroll right down to find your bug zapper by brand title and model kind and Zap Zone Defender Setup comply with our directions on learn how to exchange your bug zapper globe. At no time are you ever to take away the hood or cage of the bug indoor-outdoor zapper to change the globe. This will then enable entry to stay components and void guarantee. Which is your Bug Zapper? Click the hyperlinks beneath to search out the instructions for that specific bug zapper. 1. Unplug your Bug Vac and indoor-outdoor zapper remove from its mounting position. 2. Resting your Bug Vac on a gradual surface take away the water draw from the trap. 3. Remove the lens by locating the hole at the bottom of the lens within the centre, use your fore finger and thumb to squeeze the empty drawer holder collectively and punctiliously slide a thin metallic object. 4. Gently angle the article behind the lens to raise the centre and release the left tab by sliding the lens to the fitting.

Repeat by sliding the lens to the left to launch the appropriate tab. 5. Twist the globe to open the lamp holder to remove the lamp. 7. Twist the new globe into place to close the lamp holder. 8. Replace the lens by inserting the left tab into its corresponding hole and indoor-outdoor zapper repeat with the best tab. 9. Secure the lens by pushing it downwards, Zap Zone Defender Testimonial you will feel it click into place. 10. Replace the drawer stuffed with water and a number of other drops of detergent. 11. Plug your bug zapper into the ability socket and the globe should gentle up. Following steps 1-5 test the globe is secure within the lamp holder and substitute plastic cover. Use real yard guard replacement lamps in your bug zapper. If in case you have followed these steps and your zapper still won’t gentle up, please contact us. 2. Holding your bug zapper, turn it the other way up so the hood is facing away from you.

3. Access the sunshine by locating the lever in the centre of the bug zapper and pull together with your finger towards you. 4. The bulb cowl will open and indoor-outdoor zapper you'll be capable to entry the replacement globe. 5. Gently pull at the globe to remove it from the lamp holder. 8. Replace plastic cowl on the underside of the bug zapper and indoor-outdoor zapper safe by once more pulling the lever towards you after which releasing once the cover has closed securely. 9. Plug your bug zapper into the facility socket and indoor-outdoor zapper the globe should gentle up. Following steps 1-4 check the globe is safe in the lamp holder and exchange plastic cowl. If you have followed these steps and Zap Zone Defender your zapper still won’t light up, please contact us. 2. Holding your bug zapper, turn it upside down so the hood is going through away from you. 3. Access the sunshine by locating the lever in the centre of the bug zapper and pull along with your finger towards you.

4. The bulb cover will open and you will be able to entry the alternative globe. 5. Gently pull on the globe to remove it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and Zap Zone Defender safe by again pulling the lever in direction of you after which releasing once the cover has closed securely. 9. Plug your bug zapper into the power socket and the globe ought to gentle up. Following steps 1-4 test the globe is safe in the lamp holder and Official Zap Zone Defender replace plastic cover. If you have adopted these steps and your zapper nonetheless won’t mild up, please contact us. 2. Holding your bug zapper, flip it the wrong way up so the hood is going through away from you. 3. Using a phillips head screwdriver take away the 2-3 screws located on the underside of the bug zapper. 4. Remove the plastic cowl sealing the bug zapper globe in place.